1 / 2
m5 Stack StampS3 with carrier board holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small box to hold the stamp and the sled to mount along the side of Mitsubishi heat pump head units for remote control
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I use ESPHome and an external component to control all my split units. I wanted the devices to be outside of the housing in case I needed to reset them or otherwise modify them. I wanted to also be able to see the status LED to tell me if there might be an issue.
So there is a pin on the lid allowing me to apply a small amount of pressure to reset the ESP32 if needed and a port for the 4 wires to the heat pump, along with a bar/thin spot for the led to shine.