Mushroom
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.49 – €0.60 net (excluding VAT)
For file: houba_0.4n_0.1mm_PLA_MK4IS_44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 43.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple model of a mushroom. (No AMS/MMU needed).realistic
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 86
- Makes
- 1
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Simple model of a mushroom.
You don't need MMU or AMS
FOR NICE AND CLEAN PRINT
Do no print upside down print normally with some supports its definitely worth the result
You will get “natural texture” when using supports
Height: 23mm/0.9 inches
Material | AMS/MMU | Supports | Intfill | Layer Height |
PLA | NO | recomended | 0-10% (I used 5%) | 0.1 mm |