Deadpool Helmet stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recently printout Deadpool and Wolverine masks and needed a stand. So I put this together.
- Rating
- 0 / 5
- Likes
- 111
- Downloads
- 318
- Makes
- 1
- Views
- 4,163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently printout Deadpool and Wolverine masks and needed a stand. So I put this together.
You will need a 3/4 inch wood dowel cut to your preferred length.
Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine.
I did use supports on the notch in the plaque.
base-bottom.stl - This doesn't need to be printed unless you are gluing the eyes on like I did. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.
Wolverine helmet can be found here - https://www.printables.com/model/1025137-wolverine-helmet-stand
Print Settings
- Printer brand: Longer
- Printer: Longer LK5 Pro
- Rafts: No
- Supports: Yes
- Resolution: .2
- Infill: 10
- Filament brand: Esun
- Filament color: Ruby Red
- Filament material: PLA
- Notes: I printed everything but the plaque at .28 to save some time.
Plaque was done at .2