1 / 6
Kolimator teleskopu Newtona, telescope collimator — image 1
1 / 6

Kolimator teleskopu Newtona, telescope collimator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Długi kolimator teleskopu newtona, cienkie ścianki.

Rating
0 / 5
Likes
6
Downloads
51
Makes
0
Views
339
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Kolimator do teleskopu Newtona.

Wersja długa z krzyżykiem centrującym (należy przez wycięcia przeciągnąć żyłkę wędkarską, bądź drucik. Można poprawić wcięcia nożem [delikatnie, by się żyłka mogła się zaklinować] oraz ewentualnie dokleić kropelką kleju).
Wizjer ma 1.7 mm; ścianki 0,8 mm - by spełniał swoje zadanie, nie zużywając przy tym zbędnych ilości filamentu. Jest możliwość przyklejenia części refleksyjnej na pochylonej pod kątem 45 stopni przelotce.

Podczas używania slicera proponuję ustawić próg zwisu na 42 stopnie - dla ograniczenia podpór między wizjerem a przelotką.

Automatic translate by Google:

Collimator for Newtonian telescope.

Long version with a centering cross (you need to pull a fishing line or wire through the cutouts. You can correct the indentations with a knife [gently so that the line can get wedged] and possibly glue it with a drop of glue).
The viewfinder is 1.7 mm, with 0.8 mm walls - so that it does its job without using unnecessary amounts of filament. It is possible to glue the reflection part on a grommet inclined at an angle of 45 degrees.

When using the slicer, I suggest setting the sag threshold to 42 degrees - to limit the supports between the viewfinder and the guide.

Tags