Prusa Mini Emclosure RJ45 Extension Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.59 – €0.72 net (excluding VAT)
For file: prusa_mini_enclosure_rj45_holder_0.4n_0.2mm_PETG_MINIIS_41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 41.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
RJ45 Extension Holder for the Prusa Mini Enclosure, which can be screwed to the back of the enclosure.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
RJ45 Extension Holder for the Prusa Mini Enclosure, which can be screwed to the back of the enclosure. This makes the enclosure more transportfriendly because now you have an easy to reach connection for your LAN cable. All you need is a 50cm LAN cable, 1 M3x8 screw + 1 M3 Nut (both are included in the Mini Enclosure set). You print the holder in PETG standing on the left side (after importing into Prusaslicer) without any supports.
This is the RJ45 coupler i used: https://www.amazon.de/dp/B0CCCKKQVB
If you use a different one, you may have to adjust the width, length or height of it in the model, so i include a Fusion360 file for it, just change the paramenters and the model adjusts automatically.