LED Strip Holder 10mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Led Strip Holder for 10mm LED Strips
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 49
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this is a simplified remix of the two previous models:
https://www.printables.com/model/640069-led-strip-holder-and-diffuser
from https://www.printables.com/@michelem
&
https://www.printables.com/model/937946-original-prusa-enclosure-led
from https://www.printables.com/@Girotz_244542
Many thanks at this point!
consisting of:
Rail 250mm long - can be shortened or stretched to the desired length in the slicer.
Connector 40mm
End piece open 20mm and 22mm closed
Assembly with countersunk screws or for M3 melting thread
180° bow
90° bow
The 10mm strip I had is 10mm wide and about 2.5mm thick and has a rubbery, flexible consistency, probably silicone or something similar.
It is best pressed into the already mounted rails piece by piece by placing it on one side of the rail with one hand and pressing it in with the other hand.