1 / 2
TeePU Golf Tee Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable holder for golf tees. Intended for TPU filament to accommodate differences in tee diameter.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 663
- Makes
- 3
- Views
- 1,770
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v3.0
TeePU Golf Tee Holder
A simple tee holder designed to be clipped onto your golf bag. Intended to be printed with TPU filament in order to accommodate different tee shaft diameters.
Customize with PrusaSlicer:
- Right click on the part, click
Add Part > (Text/SVG) Depth0.5mmOperation-Cut
Please note that when the gcode is visualized there should ONLY be consistent extrusions on every layer. The goal is to minimize ALL unnecessary retractions. 100% concentric infill is recommended.
Recommended print settings:
- TPU
- PrusaSlicer with Arachne Perimeter Generator
- Recommended extrusion width 0.6mm or 0.4mm (the walls are 2.4mm thick, ideally the extrusion width factors into the wall thickness evenly)
- If you are having issues with curling at the seams, INCREASE the heat. Please reference these tweets for examples: https://x.com/brendonbuilds/status/1767963752681316729 https://x.com/brendonbuilds/status/1768650427363475586