4,502 models
The original stand positions the Stream Deck XL at an 50° angle. I needed a steeper one to get rid of ceiling light reflections in the buttons, so i designed a replacement with an 63° angle. You will need 12 5mm x 2mm magnets to snap in…
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for PETGSource material: PET
Holds up to 5 sheets Name of each sheet readable → easy selection Sheets safely embedded in the holder with stops → no sliding out Small footprint in desk space and in filament usage L x B x H = 265 x 90 x 276 mm Printed with HF nozzle…
Print approx. €5.38–€6.57 excl. taxPreliminary estimate for one variant
You need for each arm 5 M4x14mm nuts. It is recommended to use supports on plate only.
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for PETGSource material: PET
Printer: MK4s Layer Height: 0.25mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed: No Infill: 15% Print times: Total: 5h29m / 55m white / 4h34m black Need help? Find me on Discord: https://discord.gg/NndzwJvN
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Historically accurate 3D model of the iconic "Dragon's Teeth" ( Höckerhindernisse ) anti-tank defenses from the Siegfried Line (Westwall). These models are designed following the Regelbau 1939 standards, featuring the classic truncated…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
This is a holder for Steelseries headphones Chatmix dial. The mounting point will print solid and will need to be drilled out by the printer to fit the appropriate mounting hardware you'll be using. Can be mounted to any solid surface,…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Gridfinity bin for sorting stell balls. The steel balls in different sizes I ordered from Amazon where scrambled when I received them so I created gridfinity bins for sorting the balls into their different dimensions. The base boxes are…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Having detachable mic in your headset might be tiring - it bothers when it's lying unnecessary on the desk and when you need it the most, always can't find it. Here comes the mic holder for Steelseries headset! Very easy and quick model…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This is a full dice set for your tabletop games and roleplaying! All of the dice and the jawbone are printed flat…
Donatello re-mixed
I used 4 m3x30 and 2 m3x20 socket head bolts and nuts. I printed it with carbon fiber petg with 60% infill but I recommend the highest infill youre comfortable with. The grips are pla and 20 to 30% infill is fine for them.
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
attach to your ps4 controller and get racing
Happy Spring! With the weather so beautiful I decided to design something for the outdoors. This is my design of a Kicking Tee, an attempt to make a similar one to the Gilbert Rugby Kicking Tee. This works for Rugby Balls and Footballs…
Skid-steer loader (Easy print - NO SUPPORTS) for some parts like seat, body, cage and axis caps use glue Print settings 0,2mm layer 3 walls (for axis use 5 walls) 15% infill (for axis and inner part of wheels use 50% infill) for long axis…
GR.3S DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
I focused on functionality, ergonomy and good guiding and sliding when drawing. Ideal for home maker, wood workers. I often need to draw long parallel lines or draw right angles. . That is why the front part is also rounded and wider to…
Damascus Steel version of the Butterfly from Counter-Strike. The separator and the pin should stay in place by friction. The original Blade is quite hard to print, so I made a version with a duller blade angle to reduce the overhang. The…
Simple Miata teeth that doesn't require any additional hardware or adhesive. Slide it right in place and use the stock bumper attachment to secure it. (see pic. 2) Print in one solid piece without any supports. The only post processing…
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
So I only have metal pegboards - some are metric (25 x 25 x 6mm) and some are imperial (25.4 x 25.4 x 6.35mm). The pegs I got from the hardware store were horrible - sometimes they didn't stay in when taking the tools out and wobbled…
Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…
add al the components together! start racing! :)
Eine einfach zu druckende Box für Teebeutel (max. 65mmx73mm) Box ist stapelbar;) _________________________________________________________________________________ Easy to print tea bag box (max. 65mmx73mm) stackable ;)
At full size the sword measure 980mm from tip to pommel. In order to strengthen it at that scale a .5 inch [12.7mm] and two 3/8 inch [9.5mm] dowels are used. To help with printing the sword has also been sub divided into 14 parts and…
Formula 4 Steering Wheel with Assembly Guide This project contains the components to build a Formula 4 style steering wheel that is compatible with popular sim racing software SimHub. This is the same style of wheel used in the iRacing…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Please note this model was found on the internet as a free upload as a .PDO format. I cannot take credit for whom originally designed it. I have how ever taken the time to convert it and thicken it for the possibility to 3D print. A…
This is an extention to the Hybrid Coaster model by 3D.Printed.Roller.Coasters that contains a modified bench seat with side panels along with prepainted parts for multi material printers that suits the Steel Vengeance theme. Please…
my variations of the tmnt heroes and allies
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
Perfect for Halloween! Fast and easy to print, doesn't require supports.
soporte tee para rugby para patear la pelota
This is yet another Macro Keyboard / Stream Deck! There are plenty of awesome designs out there and many on Thingiverse, but none that were exactly what I was looking for in a macro keyboard. The general design for the Teensy StreamDeck…
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
If you have a CR-Touch, the Satsana remixes that have the integrated BLTouch mount will NOT work! The position of the wiring connector is right between the 2 mounting screws. This is also for the Ender 3 V2 using the Micro Swiss Direct…
12cm vysoký Teenage Mutant Ninja Turtles - Donatello
its a really snugfit and a little force was needed for the XL. Considering scaling it 0,x % up.
Teeth cookies cutter, I made this cookie cutter for dentists, we had a Christmas party with them, they really liked it
Althou pretty satisfied with the 3d-printed stand from the original I went for an even steeper version to reduce glare on the display and to make it a bit more comfortable to use as a general shortcut device for other applications. I have…
These allow a sliding Tee or "H" joint for EMT construction. I used them on my portable solar panel project for the legs and they work great. You might want to up the perimeter walls a bit for added stiffness, I used 4 with 25% fill in…
I designed and tested these replaceable parts for the Jiabaile 1/43 drift car. They increase the steering angle and make the car more controllable and suitable for tight race tracks. It’s a bit more consistent regarding the angle of…
This is an accurate 3D model (exported as STEP) of a 1.5GT timing pulley with the following specifications: Pitch: 1.5 mm (GT1.5 / GT2-1.5 series) Number of teeth: 21 & 26 Belt width: 6 mm and 9mm Bore: 5 mm (with flat on shaft, exactly…
I designed this speaker mount for my SimLab P1-X Pro using the SteelSeries Arena 7. Should work with Arena 3, 7 & 9. Should also work with extrusion profiles for various sim racing frames. Mounts using single M6 socket head bolt. SimLab…
⚠ “Danger of Death” Sign – Explosive Humor Guaranteed! A warning sign like no other! This 3D printable model blends industrial style with cheeky humor: beware of rear impact! Perfect for decorating a workshop, break room, or as a gift for…
The original version is far superior to the stock steering arm. I modified it so the slotted piece of the arm that attaches to the servo was longer. The original model would make the front end dip down when steering extreme left or right.…
A simple Tee to use on the Driving Range. Height 50mm / 70mm Material TPU (95A) Printing Time ca. 1 hour Wall loops 3 I have provided .stl files for 50mm and 70mm. I also provided the .f3d files. Strongly inspired by:…
2 hooks suitable for printing in most rigid materials. The cam slot has 2 sets of retainers internally to grip most materials. Works well printed with 0.4mm nozzle with 0.2mm layer height. Solid infill is recommended for strength. The…
A Power HD Storm 15 steering servo arm finely tuned to the Traxxas 4 tec 2.0 (25T)
Tired of collecting your tee after every shot of your golf mat? Introducing the Golf Tee Anchor System. This is designed to be used through the tee holes that generally come already punched out through your golf mat. Install in a few easy…
Modeled by trial and error. Fitment will be slightly off so shape it with sandpaper. Print face down and use supports. I used ABS+ to prevent warping on a hot summer day. Used body filler to fill the imperfections before painting. The…
Quickly throwing this together so I can post it to LoyalMoses… maybe a last minute model entry? maybe? Stomp Test Passed. This model follows the 2024 Christmas Community Print Drive Standards.
Inspiration from this .
Over time I received some requests for providing a version of my well-received airbrush stand that supports some kind of clamping or mounting mechanism. With this remix, I am providing you with a solution that enables you to create…
Creality Ender Steel Sheet Holder. Fits THREE sheets for Ender 3 V3 SE, Ender 3 S1, Ender 3 S1 Pro, Ender 5 S1, and more. If you print this for yourself, and your printer is on this list, please add your info to your make!
A small mounting bracket for the Steelseries Apex Pro keyboard to hold a USB Type-C female breakout board, allowing for the replacement of the USB Type-A pass-through port to be used as either a pass-through USB Type-C or to create a…
The name and summary cover most of everything. If you have an Amia you have most likely been frustrated by being limited to being locked upright or going into full recline. This model gives you 4 options for recline in 8 degree…
These are stencils that you can use to spray the Flying Tiger's Hell Angel. There are 2 versions - standing and sitting. These were stenciled on the P-40s used by the American Volunteer Group (AVG) also known as the Flying Tigers in World…
Garmin Edge Mount for the steering column in 2 parts: The Base is attached to the steering column with the original steering column cover screw. The Mount is attached to the Base with 2 M3x10 conical head screws. Drill 2.5mm holes at the…
The original was designed to be printed on a Prusa Mini. I have MK3S+ and 2 Bambu X1C so I wanted to enlarge the body.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I designed this for my kid to play with. Having no clear references I tried to replicate what I have seen in images over the internet. Have fun.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This 3D-printed Skull model brings a spooky vibe to life with detailed contours and a realistic structure. Print-ready with no supports…
SteelSeries Arena 9 - Desk Mount Used to mount SteelSeries Arena 9 controller under the desk. Prints part description SteelSeries Arena 9 - DeskMount.stl print on the long side SteelSeries Arena 9 - ContorllerBase print as is Supports…
Printing Instructions: All printed parts are made from PLA and should be printed in the orientation in which they appear. Part Strength Support Bed 15% No Motor Retainer 100% Touching Buildplate Oar 100% No Oar_Short 100% No Oarlock 100%…
Istvan Matuz ( https://www.instagram.com/istimat.g00/ ) wrote an extensive blog post on creating a tea steeping robot: https://solderchips.wordpress.com/2016/01/07/3d-printed-arduino-powered-lazy-mans-tea-steeper/ My remix modifies the…
The weight for 100% density ABS is ~47 grams.
Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood. Advantages: can be operated with one hand good visibility of plate types…
Note: The original gear works fairly well in ABS using a 0.25 mm nozzle (rather high layers e.g. 0.15 mm. PLA is not recommended as it creeps under stress. The two-colored print takes ~70 min / unit plus shared wipe tower. Support removal…
Just print it and it should be good.
I added 5 degrees to the angle to allow my ERCF mounted cutter to clear my top hat while being mounted on the side. The ideas is that I want a short and relatively straigh filament path from ERCF to my Triedent toolhead, without looping…
The alignment pegs on my XL printer were nearly flush with the surface of the steel sheet, making it difficult to ensure proper alignment. At times, the edge of the steel sheet would rest slightly on top of a peg, causing the sheet to sit…
I made spare tracks for my rc skid-steer, because i had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader. With the…
human mandible with alveolar canal and lower teeth
Sheath for the Mitutoyo 182-207 (150mm/6") steel rule - or similarly dimensioned rules (12.05mm x 152.45mm x .40mm). Non-affiliate Amazon link: https://www.amazon.com/dp/B0002795AM One model for PLA/PETG/ABS/ASA , this design was intended…
I needed a door stop that was easy to use because my walkout basement door is pretty high off the ground due to the footing. So I came up with this. I used 5 10x3mm round magnets because I had a bunch. Super glued them in. You could also…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I have designed the objec customizable. I can change imediatly for a bigger 8 or a steel balls of a different size. The steel ball can only be insertet (or fall out) in the center!
Our Eufy 11s vacuum needed a sweeper gear. There are a few models already, but they use a different gear pitch with 46 teeth. Ours needed 38 teeth so I designed a new one. I printed with a 0.2 mm nozzle with PLA+. Other nozzles should…
Raspberry pi Zero (W) case with camera. Holes for 2 x usb, hdmi and SD card. I also added another bottom cover (V3) with additional parts which can be mounted on a P3STEEL prusa printer. You can use a combination of the parts you like. I…
Sono Motors (tm) hat mit #mySion ein STL-Modell ihres Solarautos bereit gestellt. Da ich beim FDM-Druck einige Probleme mit dem Supportmaterial hatte (schwierig zu entfernen) und gerne bewegliche Räder hätte, habe ich mir das Remix-Modell…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Defi
Golf Tee Holder for Clip-A-Cap: The Modular Accessory System Clip-A-Cap is a modular mounting platform that transforms almost any headwear (including baseball caps, straw hats, thick winter beanies, and more) into a versatile, hands-free…
What is a dashboard without steering wheel and steering column. I designed this so that it looks a bit real and do not forget the turnswichtes. to make the flashing light switch fit, you have to cut it in the middle. the holes in the…
The Variable back stop / Tilt limiter Knob on my Steelcase Please Chair broke, so I made a new one. Works just fine. I printed it with supports, with the wide part facing up.
Make you golf balls fly like aircrafts. Design is inspired by many other golf tees I found and tested on Printables.com. It will be updated in a couple of weeks time and I might add one more (smaller and thinner) design. Printed with:…
Edited version of the original (https://www.printables.com/model/181710-logitech-g29g920-steering-wheel-magnetic-paddle-sh) to fit a pair of 20x6x1.5mm magnets on both sides. I used magnets with a 1.6kg pull force that I had laying…
Looking for a way to use the Prusa printing plates on the Ender 3 S1 Pro, I designed this part. Use ASA or ABS for high temperature suitability. I printed it with 4 perimeters and 15% infill. Use draft shield if you don't have an…
This cable spool was made specifically to fit the ChatMix dial on top of the spool while allowing the cable attached to the dial wind up inside the spool. The top of the spool involves a fitted snapping function for assembly that is made…
I printed & liked Diplomator's filament winder https://www.printables.com/model/515427-awesome-filament-spool-rewinder-upgraded but I had some trouble. I noticed the small gear (aka “Spindle - Part 1”) turning without driving the main…
I wanted to create a tee that I could print endlessly. I used PLA to start and after one swing I knew I was going to need a LOT of filament. Then tried PETG, 2 swings if I was lucky. After some research I came across TPU... Tricky stuff…
