IKEA BROR: Steel sheet holder (Bambu, Prusa, other brands)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal steel sheet holder (10x) for IKEA BROR. Operated with one hand and with good plates visibility.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 66
- Makes
- 2
- Views
- 854
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood.
Advantages:
- can be operated with one hand
- good visibility of plate types (edge) stored in it
- adjustable size by simply mounting with different spacing
- long screw slot to allow various mounting configurations
Tested with steel sheets from:
- Bambu Lab
- Prusa
(not at the same time - sheets require different mount spacing)
Should work with other brands, too. Each slot is 1.5mm wide.
Printed from PETG, 0.28mm layer, 4 walls, 5 top/bottom layers, 40% infill (you can experiment with different parameters). Mounted using M5 screws.
Source file (Fusion 360) included.
202511 - v2 - Added a side tab to prevent rotation