1 / 1
IKEA BROR: Steel sheet holder (Bambu, Prusa, other brands) — zdjęcie 1

IKEA BROR: Steel sheet holder (Bambu, Prusa, other brands)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Universal steel sheet holder (10x) for IKEA BROR. Operated with one hand and with good plates visibility.

Ocena
5 / 5
Polubienia
15
Pobrania
66
Wydruki
2
Wyświetlenia
854
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood.

Advantages:

  • can be operated with one hand
  • good visibility of plate types (edge) stored in it
  • adjustable size by simply mounting with different spacing
  • long screw slot to allow various mounting configurations

Tested with steel sheets from:

  • Bambu Lab
  • Prusa

(not at the same time - sheets require different mount spacing)

Should work with other brands, too. Each slot is 1.5mm wide.

Printed from PETG, 0.28mm layer, 4 walls, 5 top/bottom layers, 40% infill (you can experiment with different parameters). Mounted using M5 screws.

Source file (Fusion 360) included.

 

202511 - v2 - Added a side tab to prevent rotation

 

Tagi