Sword of Sinew and Steel (MTG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sword of Sinew and Steel, original art created by Chris Rahn for Magic the Gathering now brought to life.
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 330
- Makes
- 1
- Views
- 2,201
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
At full size the sword measure 980mm from tip to pommel. In order to strengthen it at that scale a .5 inch [12.7mm] and two 3/8 inch [9.5mm] dowels are used. To help with printing the sword has also been sub divided into 14 parts and oriented for printing.
For those who may want to make a smaller one. Included in the download is also the uncut model, in high and low poly counts.
Assembly
I recommend starting by putting together the two parts of the hilt along with the sinew side part 1 and steel side part 1. Those parts all go around a .5 inch [12.7mm] dowel and should be glued in place (I used 5-minute epoxy). Next assembly and glue together the sinew and steel side separately along a 3/8 inch [9.5mm] dowel, building the sided like this will make it easier to line the points up when you’re done. I found that using a few pieces of wood and some clips made assembly easier (see first image below).

Painting
I started with a coat of automotive filler primer, and then sanded of the sword smooth.

Then I painted the sword in a dark metallic metal color.

Next I did my best to apply a transition from white hot to cooled metal on the steel side. Then hand painted the handle, wrappings, sunken in sections, and blood spray on the sinew side.

Then finally I used a clear lacquer as a seal coat.