Fire hose adapter/connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter/connector for a 3" fire hose to a G 1-1/2" outer thread on a pump.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
This adapter connects a 3" fire hose to a G 1-1/2" outer thread on a pump.
The model was printed in blue TPU and in a first test water pumping test it worked flawlessly.
This pump with the fire hose is put into a plastic box with a lot of slits in it and serves as an emergency setup in case the basement (or something else) will be flooded again.
@note: I had to render the outer and inner form in two seperate runs and substract the inner form from the outer form in a second part (cobine.scad) because openscad could not handle to render so many entities in one run (especially the threads).