Fire hose adapter/connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter/connector for a 3" fire hose to a G 1-1/2" outer thread on a pump.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
This adapter connects a 3" fire hose to a G 1-1/2" outer thread on a pump.
The model was printed in blue TPU and in a first test water pumping test it worked flawlessly.
This pump with the fire hose is put into a plastic box with a lot of slits in it and serves as an emergency setup in case the basement (or something else) will be flooded again.
@note: I had to render the outer and inner form in two seperate runs and substract the inner form from the outer form in a second part (cobine.scad) because openscad could not handle to render so many entities in one run (especially the threads).