1 / 4
Kitchen Table Riser / Height Adjust
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
+8mm height for kitchen table
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to have the kitchen table 8mm higher, so I made a simple model to do the job. The opening for the table leg is 65x65mm, it gets liftet of the ground by additional 8mm.
V1 was quickly done in Tinkercad, I printed it using PLA with a 0.6mm nozzle at 0.42mm layer height.
V2 is my very first design using FreeCAD and I printed it in TPU with a 0.4mm nozzle at 0.2mm layer height.