Silicon Cube Miller index
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.29 – €1.58 net (excluding VAT)
For file: Silicon_Cube_0.8x_0.2mm_PLA_MK3S_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.44 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Unraveled cube showing the Miller indices (direction and grid structure). Easy readability using colorchange
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 49
- Makes
- 2
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation.
This type of grid is also common in other materials and might have some use there as well.
Change colour after the first or second layer to significantly increase the readability of the directions on the cube.
After printing and detaching the cube from the printbed bend each bend outside and back in to get krisp corners. For V2 assemble the middle ring and the two shells first before closing the cube.
Some of the snaps might die, but that's a sacrifice I'm willing to take. And also there is more than enough of them, so it's usually no problem apart from the rattling of the broken pieces inside the cube. Just try to refrain from unraveling a cube again as this might eventually break to many snaps and the cube won't holde any more.