Counting matching models…
made with tinkercad thats a original model, but it would be more convenient if people found it in these models ( SpringBonnie 13 and Dummy 13) remixes for anyone wondering " why 2 diferent files? ", well, it turned out that the ball joint…
Joel Miller - The Last of Us Fill out my Fan Request Form here to request new character models! https://forms.gle/ALgmpRz56WqowtMe8 https://www.instagram.com/blenkhorn3d
This model locks the arm rests to one position of your choosing by replacing the indexing component inside the arm rest with a fixed piece. There are 11 plate options labeled -5 to +5. The more negative a number, the further outwards the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I am a HUGE Mac Miller fan. My organic fusion design skills aren't the best, but I think this turned out really good! Printing: -Walls: 3 -Top/Bottom: 4-5 -Infill: 5%-10% Gyroid -Supports: Tree-Slim, I manually painted on the supports.…
To stop the annoying slide of your Aeron armrests throughout the day, I've recreated a fixed height stop that can be inserted in the armrest channel. I've included a few height positions and also the fusion360 file. There is a variable…
This stand fits into the base of the Miller Manufacturing 1 Quart Screw-on Poutry Waterer Model 740 to raise it 50mm (about 2in) to reduce the amount of shavings kicked into the water.
I model the part of Herman Miller's flo moniter arm model that is on the computer.
Logos for Miller Electric, Lincoln Electric, Hobart Welders and Forney Industries. Let me know if you're looking for a particular logo and I'll do my best to track it down for you.
This is designed to fit over the top of Herman Miller Action Office II cubical walls. It clips securely and can hold a fairly heavy coat in a small package. Category: Office
Grimm's Fairy Tales - Rumplestiltskin - The Miller's Daughter 3D printable model.
This part failed for me on my original Herman miller Aeron. I was frustrated that this part isn't easily available individually without having to buy a whole arm yoke (which is expensive). I've included the fusion 360 file so the…
A replacement for the battery cover for the Sire Marcus Miller M3 bass guitar, which tend to break easily. Print with supports, upside down, with the highest part of the clip facing the bed.
Herman Miller Aeron Chair as seen here http://www.hermanmiller.co.uk/products/seating/performance-work-chairs/aeron-chairs.html doesn't have a headrest so i knocked one up - not pretty but does the job and is very comfortable. Uses 1…
Superheroes - The Flash Standing (Ezra Miller) 3D printable model.
This is an alternative plate that I printed for my Miller DS20 Tripod, with a calibrated printer it prints and fits beautifully. I have attached both a 100mm and 160mm design with .stl and .step files. If you would like for me to attach…
Trying to come up with a bunch of beer signs to make a series of gift items. This is a very simple and quick sign. Print at .2mm starting with white, red at .6mm and gold at 1mm. The printed sign in the picture is pretty rough, but you…
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
This is a replacement part for my chair's cracked lumbar plate. I printed it in a fairly rigid TPU, and it's working nicely so far. The lofted surface has some pretty complicated curves that get chewed up when exported at low resolution,…
Superheroes - The Flash Crouching (Ezra Miller) 3D printable model.
Mig welding tip holder with two 20x3 holes on back that support magnets Has threads for tweco style welding tips I printed mine without support with a 0.4 nozzle and .16 layer height
designed to fit a Coors or Miller aluminum bottle. I made a series of these for a fishing trip where everyone tended to misplace their beer. print in your team colors to keep all arguments centered around what's truly important. Obviously…
When your armrest height won't hold you can't easily fix that on classic Aeron chair. This is a simple shim that you can insert into the space between the chair and armrest to make sure it will stay put. There are 3 thickness options…
Added carpet grips to the bottom to avoid Herman Miller Aeron office chair moving when using pedals in a sim rig (racing or flight) Print with supports. It doesn't use much material, and comes off easily when pried from edges. Directional…
MATERIAL PARA GERMINAR SEMILLAS DE HORTALISAS, CAJONES Y BANDEJA
Model This is a combined tripod plate allowing you to switch seamlessly from a Freefly Movi Pro to a Miller DS series tripod in seconds. It is similar to the Ignite Digi Gimbal mate which combines the Movi and Ronin 2 Plates. If you would…
Print settings I made it from 95A TPU, softer should work too, with: 3 walls 5 bottom layers / 4 top layers (it should be 100% plain) Installation 1 - Print the tag holder 2 - Fold it 3 - On the Atlas Headrest: unscrew 3 screws 4 - Place…
Agatha (Mary Clarissa Miller) Christie – Buste Français : Ce buste représente Agatha (Mary Clarissa Miller) Christie , l’une des écrivaines les plus célèbres de l’histoire de la littérature policière. Connue comme la « reine du crime »,…
If you've got an older (pre-2005) Herman Miller Classic Aeron chair with the round “dial” knob arm height adjusters (instead of the new flip lever locks) you can find yourself in a constant battle to keep you chair arms fixed in one…
The company named “Festool” has only been around since 2000, but their roots go all the way back to 1925 when G. Stoll and A. Fezer started “Fezer & Stoll”. 8 years later they shortened the name to “Festo” and kept going. In 1992 Festo…
Uses a single M3 Brass Heatset Insert (M3x5x4 ) at the end of the shaft and an M3x8 SHCS, to screw the paddle to the shaft. Built in support on the shaft, should break right off after printing
No magic arms, No claws, Only 3d printed parts and screws! type A self tapping screw, M6 x 40mm X2 and 20mm M6 1t washer X2, that's all Print it with support
I modeled the workbox in the actual dimensions, so it will probably need to be scaled down to fit your print bed.
An office chair wheel chock designed for the Herman Miller 2.5-inch Hard Floor or Carpet Caster that ships with the Embody. 65mm Base designed to press-fit inside the 63mm/2.5" Ezprotekt rubber non-slip furniture pad / caster cup . Print…
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Stay Alive - Miller Banks ( Adam Goldberg) - 2006 3D printable model.
For years, the armrests of my Aeron have bothered me. They were always getting in the way of my legs, my desk, or both. Last week, I finally decided to remove them to solve the problem. Imagine my dismay when I found out they can't be…
This part is meant to be a base for other parts. When mounted this part will be flush with the front face of the cubicle wall. Cut/paste additional keys as needed and space 10mm from the previous key. This is oriented for the left side of…
If you change the cylinder for the Aeron chair, trim bushing often gets mangled in the process. Additionally, newer cylinders for the chair (I used part# 1B08VM, from MingYi.office store at Amazon.com) look better with a bushing that is…
Miller “Virginia” Motorhome – Souvenir Model This is a 3D model of a Miller “Virginia” motorhome . The model was created as a souvenir , because the original motorhome had been sold. Instead of using a generic RV model or drawing…
This is a router plane fence, that fits Stanley types 71, 71-1/2, and Millers Falls types 67, 77. I made the model from scratch, but used the spacing from DAcreates' model in a second ("narrow") version of the file. I used some…
This is the house I grew up in, and it is haunted AF. This is a 6mm scale model of 330 Truckenmiller Rd., in Sonora, California. Or rather, it's a scale model of what that house looked like fifteen or twenty years ago. The wrecked version…
This simple but highly effective system locks your office chair wheels in place without removing them. Just place the blocks under each wheel — the chair becomes instantly stable and won’t move, even under pressure.
The Herman Miller Aeron Chair Hip Pivot Bushing Problem the top of the hip pivot bushing in one side of my chair sheared off, and, a little later, pulled through the hole. I was stuck in a too-low folding chair for an unpleasant while.…
Cadillac Miller météor 1959 ECTO 1 Ghostbusters A redimensionner et couleurs selon votre gouts Monochrome mais peut être peint
Made this to mount my Svalboard to my Aeron. Requires minor mod to the armrest but is backwards compatible with different screws. BOM: 2x M6 Threaded Inserts 1x 1/4" Threaded Inserts (Model supports up to 5 positions) 2x M6x30 BHCS 2x M6…
I really wanted a headrest for my Mirra 2 chair but couldn't find one of reasonable quality so I bought the Engineered Now headrest for the Aeron, which was getting pretty good reviews on Reddit and forums, and made an adapter to allow me…
a gently remixed armrest support I need to take apart the armrest lock on my Aeron, and tighten it up, but I keep not doing that. this allows me to continue not to bother. I made a few changes to make it more pleasant to use, and I added…
This is a headrest stopper I designed for the Atlas Headrest add-on for the Herman Miller Aeron Chair. I found that, for my headrest at least, no matter how much I tightened the horizontal headrest slider, it would move when I applied…
You will need 5x 40mm M4 bolt that are needed for extra strength. Print with many walls and 30-40% infill. I printed main part with ABS and the socks with TPU. The model has cutouts on inside to make slicer generate extra walls for…
Hello there, old sport
Our Miller welding shield's side adjustments broke, so we printed a new part and installed it in under an hour. It is always a good idea to keep consumables around, even small simple pieces like this, so that you minimize downtime in the…
This is a propeller shield that does not require the magnets. PLA, .20 layer. The side with the two small legs goes to the bottom of the fan housing. Print face (front) down.
This is the scholarship hall where I lived in college. I modeled it a while back for a reunion, but I only just now got around to fixing one last detail that had been bugging me. Anyway, I don't know if there's anyone here visiting…
My wife was bequeathed a Howard Miller Grandfather Clock and there were several problems with the pendulum... first of all, the pendulum was replaced previously and the replacement was the incorrect pendulum. It could not be made long…
Here is a box for the Werewolves of Millers Hollow game. The box consists of a lid and an open box. My cardboard box had fallen apart so I printed a new one.
Inspired by the outer mirror frame from The Divine Feminine , this decorative wall art frame is designed for 3D printing and large-format assembly. The model is split into 4 quarters so it can be scaled up and printed on smaller printers,…
Stoppers for the particular caster wheels that come with this specific black/white colorway of the Herman Miller Logitech Embody chair. For whatever reason it uses these 2.5 inch casters instead of the more common ones (see comparison…
I use my scissors quite often and like them available on my desk. I also don't want them to take up a lot of space on my desk so I created a 0.5 bin. A lot of work was done to get the clearances just right so the scissors sit easily and…
I love my herman miller mirra 2 chair but the design of the adjustable armrest is a total mess. It uses rubber rings to provide friction against a plastic part with teeth. Of course, over time, the rubber wears out and get so loose that…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm This…
I have a beer sign collection and thought this would be appropriate for the room. Hope you like them! These are oversized plates. Print with a color change at .8mm and then again at 1.2mm 4 separate files to choose from. Print one or…
To prevent losing hex wrench
The title says it all. This fits the medium duty series torch heads, as would be used in a torch handle such as MW5 or WH100 (e.g. MW205, MC509, etc). These caps help keep the ports clean and the o-rings undamaged when heads aren't…
The arm rest adjustment screw doesn't lock firmly, so the rest always drops over time. This wedge is inserted internally into the slot by loosening the back rest screws.
Cadillac Miller Meteor 1959 ECTO-1 Ghostbusters Possibilité de modifier la taille et les couleurs le fantôme est en relief également une version plate du fantôme est en cours de réalisation et sera prochainement mise en ligne taille 136 x…
Needed some campls to pull fabric on my chair to protect it a little (and give some psychedelic touch to my desk xD) Maybe not the best design, but it work fine
These blocks are to lock the armrest to the top most position on a size C Herman Miller Aeron Chair. You must remove the back, raise the armrest to the top position, insert these blocks and then reinstall the back. Print orientation -…
My wall was getting damaged by the back of the Atlas headrest on my Herman Miller Aeron chair, so I designed this simple bumper that prevents damaging the wall when the chair bumps into it. TPU95A, 15% infill, gyroid pattern. I enabled…
I designed this friction plate to prevent the Atlas headrest (Herman Miller Aeron accessory) from sliding because I kept losing my adjustment no matter how hard I tightened the thumb screw. It's inserted between the two linear bearings…
I used inkscape and copilot to helped create the svg codes and the put it into slicer and merged the items
3 capas para 3 colores
L-Shaped Organizer The top tray is perfect for coins, erasers, or paper clips, while the main compartment holds pens, markers, and other accessories. Minimalist, functional design that's easy to print.
I designed this friction plate to prevent the Atlas headrest (Herman Miller Aeron accessory) from sliding because I kept losing my adjustment no matter how hard I tightened the thumb screw. It's inserted between the two linear bearings…
Agatha (Mary Clarissa Miller) Christie – Buste Français : Ce buste représente Agatha (Mary Clarissa Miller) Christie , l’une des écrivaines les plus célèbres de l’histoire de la littérature policière. Connue comme la « reine du crime »,…
This simple but highly effective system locks your office chair wheels in place without removing them. Just place the blocks under each wheel — the chair becomes instantly stable and won’t move, even under pressure.
I have a beer sign collection and thought this would be appropriate for the room. Hope you like them! These are oversized plates. Print with a color change at .8mm and then again at 1.2mm 4 separate files to choose from. Print one or…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm This…
This part fixes a common issue with the Herman Miller Embody office chair where the armrest moves freely instead of indexing. Recommend printing in CF Nylon or high-infill. The uploaded file is for the right armrest but can be mirrored…
Rip the GOAT. Never got to join the 27 club. :( Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170.94x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
I created this bushing to replace a inferior bushing that was part of the original table assembly. Was my first project on the table and i noticed the broken bushing on the floor. Actually took me a bit before I clued in to where it came…
Replacement chair lever part for the Herman Miller ERGON series of office/task chairs. When mine broke, I could not find any source for replacement parts, so I ended up modelling the right one and replaced it. My brother recently said he…
I needed a replacement grommet cover for my desk, this perfectly fits my Herman Miller, Action Office II corner work surface. you shouldn't need any supports, just print flat with the clips facing up, they don't support any load so even…
This design takes jomiller97's stackable sanding disk holder design and mashes it up with the Sy's Peglock system template. This design works as a bottom and then you can add as many of jomiller97's original design for a pegboard hangable…
A spacer for lifting the piston in Herman Miller Sayl chairs if it is sitting too low in the legs. Print in whatever you like.
3D printable topographic miniature of Sydney, Barangaroo Millers Point - 🇦🇺 Australia Capture the beauty of Sydney, Barangaroo Millers Point 's city landscape with this topographic miniature! This 3D model represents the geographic area…
So this is a model of a great friend of mine whose last name is Miller. So this is a miniature version of him sitting in his favorite chair hence mini Miller. The chair structure is not very strong so definitely add a disc or any other…
I liked the original minimal design but it would not fit my black/white chair which has apparently has bigger wheels than other colour variants of the embody chair. I took some inspiration from Nicolas Castellanos…
additional component: magsafe connector type A self tapping screw, M6 x 40mm X2 and 20mm M6 1t washer X2 4 6mm x 3mm magnet 13 inserts print 2 of everything, mirror the right keyboard mount remember to edit the length and height according…
-Print this in the thinnest layers you can and laying horizontal for the best strength. -Print with normal supports. I made the head on these a little larger and longer than stock in order to work with new or worn attachment holes. These…
If the little plastic piece that makes your Herman Miller Vantum headrest "click" into place has broken or gone missing, this is a replacement. It's the part that sits between the headrest and the stem, rides the toothed rack inside, and…
