Sy's Peglock base for jomiller97's 5in Sanding Disk Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This takes jomiller97's excellent stackable sanding disk holder and adds the Sy's Peglock mounting and a spine.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design takes jomiller97's stackable sanding disk holder design and mashes it up with the Sy's Peglock system template. This design works as a bottom and then you can add as many of jomiller97's original design for a pegboard hangable stack. This design is sized to have 7 additional holders that line up with the spine (giving you 8 bins total) but would likely work fine if you added more, to a point…be reasonable.
Printables won't let me call this a remix of both the original holder by @jomiller97 and the Sy's Peglock system by @StellasFun so here is the link to the original Sy's Peglock System.
Since I don't have a multi-material printer, I couldn't take advantage of jomiller97's integrated labeling, so I also made labels that you can glue on. You can print these on a single material printer, add a pause before the layers with the numbers to swap filament, and still get the sharp look of 2 color labels. I also included a Fusion360 file for the label with a parameter that you can change to get a different number if you need others.