1 / 2
Mac Miller Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Rip the GOAT. Never got to join the 27 club. :(
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170.94x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Navy Blue/Grey
At layer #12 (1.04mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.