1 / 5
Herman Miller Embody Peg
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are replacements for the little clip pegs that hold the back fabric on the Embody.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — NoDerivatives
-Print this in the thinnest layers you can and laying horizontal for the best strength.
-Print with normal supports.
I made the head on these a little larger and longer than stock in order to work with new or worn attachment holes.
These go in the white plastic strip, push in from the back until fully seated. Then push through the fabric and back "spine" parts of the chair until you feel the clip engaged. Needs a lot of pressure.