540 models
CHECK OUT v2 AT: Sherman M4 - Kitcard von Crea_Hicks | Kostenloses STL-Modell herunterladen | Printables.com Just a simple sherman Kit Card. Easy to assemble and easy to print.
Model printed entirely in PLA, given the abundant quantity of details, I recommend a print quality of 0.1 for the small parts and 0.1 or 0.15 for the remaining parts. No screws are required for assembly but only pieces of 1.5mm wire to…
An easy to print and fast to assemble Sherman M4 Kitcard! No supports and no raft needed Print it with a small layer resolution (<0.1mm recommended) to get the best results
Check out Rev 2 of this if interested in this model. Summary This is a 1/20th scale Sherman tank, a rolling model. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just…
Man fishing on classic benchy
A very nice looking tank that can be easily assembled and glued together. Only the turret requires support. Print instructions print at 0.15 mm layer height with 20% infill. The turret and the hull require support.
This is a 1/20th scale Sherman tank, it is designed to add motors and RC control. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just a model that would be reasonably…
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
A little toothpick which slots in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Print in layer thickness between 0.1 and 0.2mm for the best results use thinner layers. Use more than 3 walls so it will be…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
This is a set of chess pieces originally designed by Herman Ohme in 1953. Models were made with the most careful reproduction of the original design and taking into account the easiness of printing. The height of the tallest figure (king)…
can be printed together the model needs to be glued together or separately in other colours the M4 Sherman tank is very realistic Print in place kit card , Assembly required need to use a support the cabin can be rotated 360 degrees
-Two colors -organic support -0.15 layer height
Char Sherman M4A1-Early echelle 1/33 Tourelle et canon mobiles Chenille et galets mobiles Assemblage des pièces fixe avec de la colle (Pattex Spécial Plastique) Impression en PLA Chenille composée de 76 maillons relier par fil de fer…
Tiny Tank – Sherman M4 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: M4A1 M4A2 M4A3 To scale a model from 1:200 to 1:144,…
After some testing found that shrinking the original down to 83.8% was a good fit. Also reoriented the part for printing Glued it in with super glue If you'd like to support me please check out my filament wishlist here Print Settings…
This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…
You can print this using whatever you want, I've obtained great results with PLA and TPU. No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade. Buy me a coffee if you want to support me!
1x3 #gridfinity bin that fits a Leatherman Wave multitool. Remix of Zack Freedman's Gridfinity template. I'm adding this line on 1/14/2025 to prove to Makerworld that I am the original creator of this Leatherman Wave Gridfinity remix.
This is inspired by Adam Savage's aluminum Leatherman holster, but I have a 3D printer, not a metal shop.
This model organizes the Leatherman bit kit and ratchet driver so that you can carry it in your pocket easily. It is a single file. I printed mine in Prusament PC blend with carbon fiber filament on a Prusa i3 mk3s+. Both bit kit cards…
I remixed the popular Free P4 bit holder to hold the new Leatherman Arc and include a positive retention bit holder as well. The print is a bit bulky, but I've used it for a few months now and it was indispensable while remodeling my…
Uses the dovetail system to attach to the skadis system. Recommend printing at 0.2mm layer height otherwise the dovetails will be too tight.
I wanted to be able to open the file and saw on my Leatherman Arc with my thumb so printed a simple insert. It would probably be more comfortable to print out of TPU (scale up 1-2% if you do for a snug fit) but I printed it normal scale…
Fishermans Tackle Box the perfect box for fishing accessories. Use an M2x25 screw and nut for the handle or whatever fits. Size: 150x95x35mm
I wanted to make a more compact bit kit holder for the leatherman bits since the original ones that it comes with are bulky and take up a lot of thickness in a sheath. I modified a model I found and added an extra spot for the micro…
Parts to wet mold leather and make a large multitool case/sheath. Finished inside dimensions are 4.5 x 1.5 x .75” (114 x 38 x 19mm) . BaseForm, Form, Mold, FormTrim, and Jig for a large Leatherman. Only the Form and Jig are needed but the…
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! Recommend 3 walls and just be careful with the pole when you take off supports. Check out the FULL COLLECTION HERE:…
Handy thumb stud for the Leatherman Surge knife to easily gain acces to both of your knifes. The tolerances are made for press fit It is possible to secure it with some super glue, but not needed :) Printing settings layer height is not…
The M4A1 Sherman is the first variant of the early-generation Medium Tank M4 (Sherman) family. The M4 Sherman medium tank, named after the great American Civil War general William T. Sherman, was one of the Allies' most iconic fighting…
This takes 2 M3x20mm screw and nut to keep the Bit Kit together.
hello there here is my second tank the american tank m4 sherman i have split it in 4 parts so you can print it easy i have also add the stowage to the vehicle so you can customise it i have a whole 3d printed army of american sherman…
Print times: Latch- 6m35s 3.96grams Body- 56m34s 33.33grams Print Instructions: Print in default orientation. No Supports needed. 2x walls. 10-20% infill. I printed in Bambu Matte PLA, but this should work with most materials.
Leatherman Wave holder for Honeycomb storage wall
A simple wall decor for the house. I printed the different colors by using layer height.
The entire process rigorously tested my patience and attention to detail, and the effort I put in shone through in the outcome.
Hello All, This is a more or less 1:30 scale (estimated) full model of the movie tank "Fury". Let me first start of with giving credits to "Jernej Primon" on My mini factory for his excellent " Articulated Tank from Fury"…
I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…
This version of the Sherman would be the base for what would be the final Sherman in US Army use, seeing action all the way out to the Korean War in US Army hands. This tank had a welded hull just like the M4, A2, and A4, but used a new…
While this is my original print design, it is modeled after a similar production model for sale on another site. I am not affiliated with that product or producer, and I'm sure that product is of exceptional quality. This is just my…
Loosely inspired by Adam Savages Youtube video about making a belt holster from aluminium, I created this holster for my Leatherman Charge TTi. Belt size: up to 40mm wide and 3mm thick, but feel free to contact me if you would like a…
Two-tier fishing storage table for small accessories. water drainage holes added. To connect, I recommend small screws with a nut and do not tighten hard. Attachment to position for 3 rods. Supports only for the small support cubes inside…
The M4A2 Sherman is the third variant of the early-generation Medium Tank M4 (Sherman) family. In April 1942, the M4A2 was designed with a new General Motors 6046 engine (two GM 6-71 General Motors Diesel engines combined together),…
Easy open tab for the leatherman wingman utility knife. I got tired of trying to open it one handed and decided it needed an upgrade. Slight interference fit, meant to be lightly hammered or pressed into place to hold it in. I used a vice…
Two kinda like designs. One with ring, other in a polygonal way This woggle or Scarf Ring represents the worldwide friendship among Guide and Scout movements. On one side, it's got the global Scout fleur-de-lis, and on the other, the…
The tool rocks a little in the bin, but works good enough for me. Feel free to improve on the design, step file is provided.
CZ : Vrchní dekorace která nesmí chybět na dortu každého dobrého rybáře při oslavě narozenin. Stačí přidat kousek vlasce a rybku přivázat na prut Tisknuto PLA EN : Top decoration that must not be missing on the birthday cake of every good…
Angepasste Holster Version von 3D-Designer_AT für das Leatherman Surge mit beiden Bitkit haltern und für Gürtel bis 55mm Category: Tools
Practical tools offering countless uses. The pearl is pulled over to the main cord through the hole in the middle, you can connect swimming, lead, hooks, etc. to the hole on the protruding ear. depending on the fitting.
Simple Toothpick with (or without) lanyard ring. Tool that fits in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Version with ring and without. Longer toothpick and short. Do not care about material, you…
Leatherman FREE P2 / P4 multi-tool adapter that uses the Philips head screw driver to allow any hex 1/4" (6.35mm) screw driver bit to mounted. The adapter can be stored on the clip. The assembly still fits inside the nylon carrying case.…
This is a remix of schutz's Pocket Screwdriver Kit. This kit holds ten of the flat Leatherman driver bits. They fit well in the elastic loops on the side of my nylon Leatherman sheath. I added extrusions for six 5mm x 1mm disc magnets to…
Introduction Everyone who has bought a packet of Fisherman's Friend knows how useless the little paper bag is to get the mints out of. You could transfer them to a small tin but then you have to deal with the rattling sound. Instead I…
(not so) To scale model of the real life building for “Los Pollos Hermanos” from Breaking Bad. Made in blender, printed at 0.20mm layer height with 10% infill. In total, it took about 20 hours to print everything. Notes: LPH_Full.stl has…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
u have to heat up the tracks to curve it around the turret, like put a hot glue gun on the tracks for a bit to shape them.. it works really well but just dont over-heat it
Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…
I added a hole on the underside of this model so that it doesn't get pushed out when opening it.
I work in the Wind industry, and I have found that my Surge + full bit kit are endlessly useful as an EDC. Years ago I made a holster out of Polymorph, and it worked great. I always planned to design a holster for 3d printing, but I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
sick of trying to orient a round object that only goes in 1 way by holding it on the end of a wet spaghetti noodle from 4 inches away? This is the way it should have been made to begin with but 3d printing to the rescue. print in tpu…
A Leatherman bit holder for the Arc. Picks up the fasteners for the pocket clip. Shown printed at .1mm layer height out of Polycarbonate with a .6mm nozzle.
Gridfinity bin for Leatherman ARC. Tool is easy to pick up and under the tool there is a handle to pick up the bin. Pictures show a print with color change at the top 5 layers. Also ironing is turned on for smoother top surface.
the leatherman wave is an amazing tool but not the greatest screwdriver but i love the leatherman screwdriver bit set with the extensions so i design this screwdriver handle that accepts the leatherman bit/extensions and now its my…
Remixed the Skeletool hammer to hold 2 extra bits in the carabiner/bottle opener. The bottom part snaps in place. v2 already available extra plastic around the pin-hole & less… uhhh “glitches”? The model is smoother, fits better & more…
Prototype for Sherman S Headlight mask. Helps cut light from shining into oncoming traffic as well as helps protect against small scratches. Also makes the SS look mean. Print in TPU.
Printed on ender 3 S1 0.3mm layer level Resize as you wish I recomend a 1mm thickness or more to ensure its strong enough
Thumbstud for Leatherman Free T series multitools
Whilst great for emergencies, using the bit holder on the Leatherman® Tool can be a bit awkward so designed this compatible accessory to complement my Leatherman® Tool & Bit Set. I found most success printing handle first in PLA with…
Storage for the Leatherman Signal compatible with the Gridfinity system by ZackFreedman . Grid size: 1x3x6 Note that fitment was designed with the pocket clip installed. Depending on which side you display, the Leatherman will orient…
This is a faithful reproduction of the Autodromo Hermanos Rodriguez. Its dimensions are 20cm long, 12.5cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model,…
Diese 3-teilige Dose passt im Auto perfekt in einen Cupholder und lässt sich durch den Drehverschluss einfach öffnen und schließen. Die Dose kann man natürlich auch für andere Inhalte und Standorte wie z.B. den Schreibtisch oder die Küche…
Scale: 1 : 30 Vehicle type: Medium tank Model for 3d printing Design refer to War Thunder.
Remix of this thingiverse model The original would fall over sideways unless the wheel was perfectly aligned. I gave it a wider base and changed the bolt holes to all be M4x30mm, shorter bolts will also work. Print the sides with the…
Recommended printing in 100% infill, Variable layer heights. The teeth being finer layer heights, PETG or PLA has worked nicely for me, Ender 3, Prusa Mini & Mk3 can print without supports, but its better with. I work for the ambulance…
I wanted to find a leatherman arc holster for my leatherman. I couldn't find one online, but I found a couple of models I could combine and create the thing I am searching for. Took me sec but I got it working. Main model I got from the…
I recently purchased a Leatherman Skeletool multitool. I absolutely love the tool, but it has one minor problem-- the driver bit (screwdriver) is exposed and digs into my hand when I'm using the pliers. This is a small slip-on cover to…
This model locks the arm rests to one position of your choosing by replacing the indexing component inside the arm rest with a fixed piece. There are 11 plate options labeled -5 to +5. The more negative a number, the further outwards the…
Just wanted a spot for a weatherman wave laying on its side. I made another version which is deeper but haven't printed it out to test it yet.
Ikea Skadis Leatherman Multitool Holder. Designed to fit the Wave+, but also fits others.
Fisherman with Swirling Fish Wall Art
This print is designed to carry an extra bit for your Leatherman Wave or any other Leatherman that supports that bit system. Very practical and very nice to put on your keys so its always in your pocket!
To stop the annoying slide of your Aeron armrests throughout the day, I've recreated a fixed height stop that can be inserted in the armrest channel. I've included a few height positions and also the fusion360 file. There is a variable…
There weren't any free 3d printable holsters for the Leatherman Free P4 that I could find, so I decided to design my own. It's still a work in progress, and will hopefully get better if I have time to work on it more. I want to try this…
Sherman tank track type: T54E1 !!!!!!!!!! like and follow !!!!!!!!!!!!!
I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…
Do you have a leatherman skeletool, and want to store it in its own, custom bin? Maybe in a drawer, or with stuff stacked on top? Well do I have the model for you ! It is what it says on the tin. It's a gridfinity-compatible bin which…
Remixed to allow for a wider belt (increased belt loophole to 45mm) Print with standard supports (everywhere) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Amazon…
Gridfinity Leatherman Wingman holder
I really like the original model, but it didn't fit into the surge, so I changed it a bit.
Autodromo Hermanos Rodriguez, Mexico, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
A simple handle for Leatherman bit extenders that turns the handle into a fully fledged screwdriver. The handle is small enough to be carried in the Leatherman Surge pouch along side their full bit set and a micro ratchet, making for a…
A posing fisherman. Hope you like it.
