MMU2/3 Wallsetup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a set up for your MMU unit to attach the spools to the wall (whole setup with the enclosure)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Here is my version of the MMU3 setup. My version uses the enclosure for the mk3/3s/4/4s but it would also work without it. It consists of two brackets which can be screwed to the wall. One with 2 holes for the PTFE tubes and the other only for spools.
Then simply print 2 of each and mount them slightly offset from each other (see picture).
I have the 5 spool here in my Sunlu dry unit. I used the wall bracket from: Ankhadia Sunlu / Tecbears Fila Dryer S2 - Filament Trockner S2 Honeycomb Bracket von Ankhadia | Kostenloses STL-Modell herunterladen | Printables.com and the dryer holder itself from: Johination Sunlu / Tecbears Fila Dryer S2 - Filament Trockner S2 von Johination | Kostenloses STL-Modell herunterladen | Printables.com.
If you don't have a dry unit, you can simply print another holder.
In case you want to make adjustments to the models I will upload the STEP files as well
The buffer unit is attached to the enclosure with the model from:
sh4q MMU3 original Prusa Enclosure Buffer Plate Holder von sh4q | Kostenloses STL-Modell herunterladen | Printables.com
I printed the wall bracket from PETG with 15 infill. But PLA should also suffice
Have fun printing and building