hook for obstacles (old version)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.43 – €5.42 net (excluding VAT)
For file: Hook_0.4n_0.2mm_PETG_MK4S_3h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.92 excluding VAT (range midpoint).
- Weight reported by the author
- 105 g
- Print time reported by the author
- 3.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D printed hook for obstacles new version : https://www.printables.com/model/1064514-hook-for-obstacles-new-version
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The bottom circles diameter are 22mm and 13mm
Tested print settings :
- Tested material is PETG and is very strong
- In the bottom part 80% infill, in the rest part 50% infill
- Set supports everywhere
- Set 5 perimeters