Eurobox Insert 1/4 crossed Divider for small pieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two diver for an Eurobox Insert 1/4 crossed Divider
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have some of the Eurobox System boxes you might have also some of the inserts.
The problem (at least for me) was, that for small pieces the inserts where to large. Therefore I created a divider for a 1/4 crossed insert.
There are two inserts. Two for the left and right side and one for the middle. Therefore, you need to print 2x a side insert and 1x a middle insert.
You can print the inserts in two ways.
- Full high
- Half high: Slice the STL at 40 mm, which let you make use of two levels of insers, if you want to.
Print with PLA or any other material you want. High speed printing on my mk3.5 works fine, what will save you a lot of time.
If you like my model(s) please leave me a like to support my work. Thank you!