1 / 2
Self watering inlay (pot) for Ikea NYPON 9 — image 1
1 / 2

Self watering inlay (pot) for Ikea NYPON 9

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Self watering inlay (inner pot) for Ikea NYPON 9

Rating
0 / 5
Likes
6
Downloads
32
Makes
0
Views
254
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial — Share Alike

Update 12.11.2024:

Fuss_MK2 - modified thread (easier assemble)

Schwimmer_MK2 - The hole for Schwimmersteg reduced from 2,6 to 1,6mm

Schwimmersteg_MK2 - reduced from 2,5 to 1,5mm

Kanaldeckel_MK2 - Lower diameter increased by 0.1 mm

Most of modifications was made to make the float body lighter to improve the swimming behavior.

_______________________________________________________________________________________________________________

Here comes a self watering inlay (inner pot) for Ikea NYPON 9

It is simple to print. You need support only for the cap and floating body. The floating body has to be filled up with styrofoam.

Don't worry about any leakage. It is not nessesary to print it tight! 😁 Use your commen print settings and speed

Used filament: Sunlu PETG

if you like the planter inlay you can support me by watching the video (german):

Tags