1 / 2
Self watering inlay (pot) for Ikea NYPON 9 — zdjęcie 1
1 / 2

Self watering inlay (pot) for Ikea NYPON 9

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self watering inlay (inner pot) for Ikea NYPON 9

Ocena
0 / 5
Polubienia
6
Pobrania
32
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 12.11.2024:

Fuss_MK2 - modified thread (easier assemble)

Schwimmer_MK2 - The hole for Schwimmersteg reduced from 2,6 to 1,6mm

Schwimmersteg_MK2 - reduced from 2,5 to 1,5mm

Kanaldeckel_MK2 - Lower diameter increased by 0.1 mm

Most of modifications was made to make the float body lighter to improve the swimming behavior.

_______________________________________________________________________________________________________________

Here comes a self watering inlay (inner pot) for Ikea NYPON 9

It is simple to print. You need support only for the cap and floating body. The floating body has to be filled up with styrofoam.

Don't worry about any leakage. It is not nessesary to print it tight! 😁 Use your commen print settings and speed

Used filament: Sunlu PETG

if you like the planter inlay you can support me by watching the video (german):

Tagi