1 / 5
MMU3 buffer holder with leg R4 (to fix back of the buffer) — image 1
1 / 5

MMU3 buffer holder with leg R4 (to fix back of the buffer)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Better attachment of the MMU3 buffer to the MK4/S printer (front and back)

Rating
0 / 5
Likes
6
Downloads
51
Makes
0
Views
262
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

The MMU3 buffer is attached to the printer on a single point (front of the buffer) by means of the buffer-holder-R4.

Depending the filament spool arrangement and keeping the bowden tubes as straight as possible, the buffer gets twisted and there is some force applied to the buffer-holder-R4 printer attachment point.

To stabilize I combined the back leg and front buffer holder to allow to attach the back of the buffer to the printer too.

There are following mounting variants:

  • buffer-holder-leg-short-belowPSU-R4: Attaches on the back of the MK4/S main frame (below the PSU, or behind the PSU at the very back) → Original buffer position
  • buffer-holder-leg-belowZStepper-R4: Attaches on the front of the MK4/S main frame (below the Z stepper) → More in front buffer position (if there is no room at the back)

Print same as the original Prusa parts using PETG (Jet Black), 0.20mm STRUCTURAL, 20% infill.

Please leave a comment and make photo!