Cafelat Robot Tamper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large tamper designed for the Cafelat Robot basket.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 563
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Large tamper designed for the Cafelat Robot basket. It is designed so that if an 18g dose is put in the basket, it should just reach the top when completely tamped, and be leveled. Uploaded two versions, a snug one that will give a better feeling experience and easier to level, and a loose version that will fit even if your basket is slightly warped (fairly common and the reason why the original tamper is kind of loose). Both version will tamp without leaving a burr on the side of the puck
The ring between the tamping section and the leveling is to prevent an airlock that would cause the puck to lift after tamping.
Printed in PLA but recommend a food-safe resin instead.
Printed vertical with organic supports