MicroJig GRR-RIPPER Wall Control Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall Control mount for the Micro Jig Grr-Ripper
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 64
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved the original model for its simplicity and effectiveness for holding and mounting the Micro Jig GRR-Ripper. But, I also love my Wall Control panels for tool storage. So, I remixed this to work with the DDD Wall Control system.
I recommend printing the main body on its side as you can see in the slicer screenshot. Printed on its side, you will need to use supports. I printed in PolyMaker PETG and used Bambu PLA for the support interface with a 0 top Z distance and a 0 Top Interface Spacing to get the cleanest print.
You can print the main body on its back but it won't be as stong and could snap at the layer lines.
I used a 0.4mm nozzle, 0.24mm layer height, 3 walls, and a 15% gyroid infill.