MicroJig GRR-RIPPER Wall Control Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Control mount for the Micro Jig Grr-Ripper
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved the original model for its simplicity and effectiveness for holding and mounting the Micro Jig GRR-Ripper. But, I also love my Wall Control panels for tool storage. So, I remixed this to work with the DDD Wall Control system.
I recommend printing the main body on its side as you can see in the slicer screenshot. Printed on its side, you will need to use supports. I printed in PolyMaker PETG and used Bambu PLA for the support interface with a 0 top Z distance and a 0 Top Interface Spacing to get the cleanest print.
You can print the main body on its back but it won't be as stong and could snap at the layer lines.
I used a 0.4mm nozzle, 0.24mm layer height, 3 walls, and a 15% gyroid infill.