Liczymy pasujące modele…
This part uses an existing Microjig Grr-ipper and hardware to bolt on an additional bit of security. The part can slide up and out of the way, or slide down and grab the back edge of the board. If you keep the bolt loose, it can use…
A vertical wall mount for the MICROJIG GRR-GRIPPER 3d push block.
I recently built a thin-strip cutting jig for my table saw, but it needed some kind of handle to safely guide it through the end of the cut. I own several Grr-Rippers and LOVE the comfort and safety they provide. I figured the handle…
UPDATE The PiGRRL Zero case has been split into four pieces for printing on smaller beds! - Check the case-split.zip archive You've seen PiGRRL, Super Game Pi, PiGRRL Pocket, PiGRRL 2 and now... it's time for PiGRRL Zero! In this project,…
UPDATE 1.2 (10/12/17) Top and bottom case has been update. Replaced standoff "nubs" with mounting holes. Mounting holes updated to 2.6mm diameter (works with M2.5 x 5mm screws). Holder updated to better house slide switch. UPDATE 1.1 The…
Hang your MicroJig GRR-RIPPER on a vertical surface with this snap-in mount. Features holes for #8 screws (#6 works ok, too) with the bottom one for adjustment to make it plumb. PLA has a bit more clutch force than PETG (due to the former…
This is an exact replacement for the main parts of a Microjig GRR Gripper GR-1. Included are the two sides, middle, and top. I didn't duplicate the handle, You can find it by NightMyst at…
A nice and simple method to wall mount your MicroJig GRR-RIP block. Can be fixed straight to the wall or added onto a french cleat fitting as I did personally.
A simple tool holder for the Microjig GRR-RIP Block tool. The holder has a build-in fresh cleat for 12mm (½") cleats. If you need for 18mm (¾") cleat or no cleat at all, please look under related models. The model is 18cm long, so it can…
Printed in PLA. The micro jig is pretty light weight, so I used the following settings: Wall loops: 3 Bottoms Layers: 3 Top Layers: 3 Infill: 20% Infill Pattern: 3D Honeycomb Print orientation: Bottom side on build plate
A simple tool holder for the Microjig GRR-RIP Block tool. The holder has a build-in fresh cleat for 18mm (¾") cleats. If you need for 12mm (½") cleat or no cleat at all, please look under related models. The model is 18cm long, so it can…
A simple tool holder for the Microjig GRR-RIP Block tool. The holder is for waal mounting using two 3,5mm screws. If you need for French cleat mounting, please look under related models. The model is 18cm long, so it can be printed on the…
Storing the Grr-Ripper has always been a bit of a pain - I tried a model that held it on its vertical axis, but that was very particular about where the balance support was located - I wanted something would work with the balance support…
I loved the original model for its simplicity and effectiveness for holding and mounting the Micro Jig GRR-Ripper. But, I also love my Wall Control panels for tool storage. So, I remixed this to work with the DDD Wall Control system. I…
I have adapted the sweeping name plate model made by Makkuro to one silly furry meme I have seen and started using as inside joke with my friends. The model in my photos was printed in two color. The base is glorious anthracite PLA by…
MegaGRRL - YM2612 VGM Player The MegaGRRL is an ESP32-based, hardware Sega Genesis / MegaDrive VGM player. Using real YM2612 and YM3438 FM chips to play back music from games like Streets of Rage and more. It's designed by Kunoichi Labs,…
I have designed a new knife disc for Alfred. I have been using it for 30 days now. In my tests, the cutting quality appears to be better, and the operational noise seems lower/more consistent. The knife disc features openings for M4 nuts.…
Keep your baking essentials neatly sorted with this compact and thoughtfully designed baking organizer. Perfectly sized for standard pantry cabinets and drawers, it fits seamlessly into most pull-out systems and helps you store small…
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a GRR-RIPPER saw/router pushblock clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in…
Designed to mount a MicroJig Grr-Ripper 2Go on a Wall Control pegboard. All the files are included to print the mount, sidepieces, etc. Easy print; no support needed. 4 dovetails locate and securely hold the gripper in the mount.
I designed an inner frame for the Pi Grrl2 so that all of the electronics are held together as one unit. That unit is then attached to the front of the case and the back is just a cover. Makes assembly much easier. Cases uploaded reflect…
This is a way to hold the GRR-Ripper on a pegboard
I added more material to the joint to prevent breaking issues when connecting the two halves. Category: Electronics
Building a PiGrrl2 but looking to use an A+? This little cover will fill in the hole on the right side of the PiGrrl2 V2 Case due to to the smaller form factor of the A+. Print Settings Printer Brand: Monoprice Printer: Maker Select…
Customized version of http://www.thingiverse.com/thing:1074513 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1074513 Instructions Using the following options: topFlare = 15 diameterOfBase = 26 topHeight…
This is a bottom case for an Adafruit PiGRRL Zero game console. It is entirely compatible with the default top case and has the following improvement: slots for a 28mm diameter speaker ( https://www.adafruit.com/product/1890 ) mounting…
The Geek Card was designed and printed for Thingiverse superstar @mathgrrl in appreciation of her inspiring 3D Printing blog http://makerhome.blogspot.com Every time I read the blog I come away with a new 3D printing idea or tip.…
--Moved from Thingiverse-- Part 2 of the NeoDue upgrade - a 5" display case that fits onto the Neo (and can be printed on it despite its print size limitations). You need: one of each parts 7x 3 mm x 14 mm plastic screws (four for the…
Organizing insert for Nidavellir board game by Grrre Games. Allows to hold and organize the game and Thingvellir and Idavoll expansions in the game box. Allows to store the Royal Treasure without removing the coins and without dismantling…
Update: Duet Wifi Rev. 1.05 and up have a larger wifi antenna. Please use the files "halter_leiterplatte_duetwifi_rev105-3.stl" and "blende_duetwifi_rev105-3.stl" for this board. These parts are identical to the original ones with the…
–UPDATE 2: I have added a new part „adapter_extruder_re_anguliert.stl“ which allows usage of a bigger and more powerful extruder stepper without losing build volume - see last picture. The only drawback of that one is that you need a…
