Prusa Mini+ (Another) USB & Power relocator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a simple container to place the power switch and USB socket on the Z axis
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the USB socket, I used (just as an example) Right-Angled USB 3.0 Cable (this link) . Any similar product will work because the panel mount is standard.
First, you need to screw the T-Nuts in without tightening them, then attach them to the Z-axis, and finally tighten the screws. There are through-holes specifically for this purpose.
I reused the original button.
It is necessary to replace the wires with longer ones. I won’t go into details, assuming that anyone attempting this modification knows how to do it.
I’ve also included STL files for the T-Nuts and the power switch CAP (https://www.printables.com/@Angelo), but any other model can be used.