1 / 5
Button Repair for Garmin Varia RVR 315 (Bike radar unit) — image 1
1 / 5

Button Repair for Garmin Varia RVR 315 (Bike radar unit)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The on/off button for my Varia RVR 315 disintegrated (common issue). This TPU sleeve with button slips on to the unit.

Rating
5 / 5
Likes
8
Downloads
248
Makes
4
Views
1,035
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The on/off button for my Varia RVR 315 disintegrated (common issue complained about on relevant forums). This TPU sleeve just slips on to the unit and has an integrated button and hole for the indicator light.

I made it with Esun TPU95 @ 0.2mm layer height, but it may also work with other flex type filaments. (update July 25 - have found that Polymaker TPU gives a far superior result)

It seems to grip OK when put on and should be somewhat water resistant.  The option is to glue it on to seal it.

You will need a small amount of Paint on Support for the switch nub (refer slicer photo).  When printed you can turn it inside out to more easily remove the support.

Note in some of the photos it has a tether which is not part of the design (nor the standard Garmin product)

This is works in progress in terms of longevity of the TPU and the bonding to the case. Hopefully it will seal enough to keep moisture out.

Update 7th Nov 2026 - In response to a user query I have added 2 additional 3mf files which if needed allow you to manipulate the button position in slicer in case you need additional length to operate the switch in the Varia Unit. 2nd 3mf file has added an extra 0.5mm to illustrate. Last picture shows the edit in slicer (it needed both x axis stretch and then x centre shift)

Tags