Simple Rondomizer Inlets for Gravitrax
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are simple inlet tiles for GraviTrax. Designed to have tiles with holes on top for dropping balls.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 59
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are simple inlet tiles for GraviTrax.
Designed to have tiles with holes on top for dropping balls.
2-way tiles in 120, and 180 degrees, and 3-way tiles in 120-degree intervals are available.
They come in two heights: 20mm and 25mm - The 20mm version is the lowest height in GraviTrax (in 5mm increments), and due to design constraints, the speed of the balls that come out is relatively low. If you want more speed, we recommend the 25mm version.
No support is needed. Printing is very easy.
Note : to use 2-way 60 degree ones, you need a 6-exit customized base tile.