Simple Rondomizer Inlets for Gravitrax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are simple inlet tiles for GraviTrax. Designed to have tiles with holes on top for dropping balls.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are simple inlet tiles for GraviTrax.
Designed to have tiles with holes on top for dropping balls.
2-way tiles in 120, and 180 degrees, and 3-way tiles in 120-degree intervals are available.
They come in two heights: 20mm and 25mm - The 20mm version is the lowest height in GraviTrax (in 5mm increments), and due to design constraints, the speed of the balls that come out is relatively low. If you want more speed, we recommend the 25mm version.
No support is needed. Printing is very easy.
Note : to use 2-way 60 degree ones, you need a 6-exit customized base tile.