Fidget Spinner Snap In Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for 608 bearing used in fidget spinners. Snaps in place for a secure fit, no glue.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 84
- Makes
- 2
- Views
- 244
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cap for fidget spinners using the 608 bearing. Print two caps per bearing and snap them together to cover the bearing on each side.
To install, insert each cap half way into the bearing so that the cap teeth don't interfere with each other (see pictures). Once lined up, push the caps together firmly until you hear a snap for each side.
The caps can be removed by prying the gap between the cap and bearing. Note that the caps may break their teeth when being removed and can't be reinstalled a second time.
Print with 100% infill and 0.20mm layer height. Don't forget to print two per bearing.
Pictured fidget spinner is from Win's Designs: https://www.printables.com/model/141940-fidget-spinner