Fysetc E4 OnStep case for Explore Scientific iExos-100 PMC-Eight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case to replace the stock iExos-100 PMC-Eight board with a Fysetc E4.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- GNU General Public License v3.0
This is a simple case to replace the stock iExos-100 PMC-Eight board with a Fysetc E4.
The board screws into the base using M3 screws and M3x5x4 threaded inserts.
You can then re-use the existing M2.5 screws from the iExos-100 housing to secure the lid and base together and through to the existing machined housing.
The case has slots for a power barrel socket, and an rj45 socket. For the rj45 connector, I used a keystone jack and cut/glued it into place. I had to snip off the reset button from the E4 board to fit it together.
I access the E4 from INDI over wifi/TCP to eliminate wires between the mount and the scope-mounted raspberry pi. If you want to access over USB, you'll need to add a usb port cutout. Simple OpenSCAD files attached if needed.