Fysetc E4 OnStep case for Explore Scientific iExos-100 PMC-Eight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case to replace the stock iExos-100 PMC-Eight board with a Fysetc E4.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
This is a simple case to replace the stock iExos-100 PMC-Eight board with a Fysetc E4.
The board screws into the base using M3 screws and M3x5x4 threaded inserts.
You can then re-use the existing M2.5 screws from the iExos-100 housing to secure the lid and base together and through to the existing machined housing.
The case has slots for a power barrel socket, and an rj45 socket. For the rj45 connector, I used a keystone jack and cut/glued it into place. I had to snip off the reset button from the E4 board to fit it together.
I access the E4 from INDI over wifi/TCP to eliminate wires between the mount and the scope-mounted raspberry pi. If you want to access over USB, you'll need to add a usb port cutout. Simple OpenSCAD files attached if needed.