1 / 2
Choc Spaced Corne XIAO thin case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This is my take on making a flat case for the Choc Spaced Corne XIAO
The case and battery cover can be mirrored to use for the right side. For the dongle, I used this print: Seeed Xiao BLE Case
Required materials
- 4x flat hat M2.5x4 screws (for the boards)
- 4x flat hat M2x4 screws(for battery covers)
- Joycon battery kit
- Rubber band for the travel case
- Thin silicone or rubber pads (optional)
Assembly
- Plug in battery to the board
- Put the battery in the battery cover (it should be a tight fit) and screw the cover to the board from the back side using the 2 M2 flat hat screws
- Slot in board into case (it should be a tight fit) and add 2 screws near the thumb keys to hold them in place
- Add rubber/silicone feet
Note: The battery covers have to be removed to access the reset button