1 / 2
Sovol SV08 Fully closed Raiser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sovol SV08 Fully closed Raiser.This is a remix of the open style Raiser of…
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 87
- Makes
- 1
- Views
- 792
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Sovol SV08 Fully enclosed Raiser.
This is a remix of the open style Raiser of Gergo: https://drive.google.com/drive/folders/1fJzGwCswiRXadmaaq2O9OR1fVISvKaK1
@Gergo: if this remix infringes a copyright of yours, please let me now and I will remove this remix.
Changes compared to the original design:
- fully closed
- magnet holes at the top to securely fix the top panel
- opening filler piece that fills the gap around the spoolholder
Required 3D printed parts:
- Raiser_LeftBack.stl (1x)
- Raiser_LeftFront.stl (1x)
- Raiser_RightBack.stl (1x)
- Raiser_RightFront.stl (1x)
- OpeningFiller.STL (1x)
Required other parts:
- m3x10 screw (12x)
- m3 washer 8.8x0.8 (12x)
Optional other parts:
- magnets 8x3 (28x)
- metal round plate 10x0.4 (28x)
- top plate 520x530x5
Recommended materials:
- Raiser_LeftBack.stl (ABS, 10% infill, support touching bed)
- Raiser_LeftFront.stl (ABS, 10% infill, support touching bed)
- Raiser_RightBack.stl (ABS, 10% infill, support touching bed)
- Raiser_RightFront.stl (ABS, 10% infill, support touching bed)
- OpeningFiller.STL (ninjaflex, 15% infill, support touching bed)
Remarks:
- I did print the raiser in PETG, if needed I will reprint in ABS
- I use cheap wood as top plate
- the double sided tape on the metal round plates was not strong enough by itself to stick to the topplate. This has been fixed by adding a drop of superglue to the metal round plates
Category: 3D Printer Parts