1 / 3
Magsafe Stand for ESR Halolock mini charger with added weight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the original magsafe V1 stand to fit the ESR brand Magsafe charger. STL has negative void for 40 pennies total.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 1
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
you will need to add a pause on layer 45 (assuming .2 layer height) to place 5 pennies in each hole, (40 cents total) the holes are sized to fit 5 max with a .2mm layer above for cushion to ensure the nozzle doesnt grab on the edge of any of the pennies when you restart the print.
REV1- Moved the voids for the weights down another layer to hopefully help with pillowing on the top surface.
i included the non weighted version in the files if you prefer it that way.