Counting matching models…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
The original design fitted my LCR T4 but it was not perfect. You still need to print the bottom case from the original design. Print instructions This is the one I ordered https://s.click.aliexpress.com/e/_DlLbzqD different vendors have…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I really liked the original ESRack system design created by @EvilProphet . I created a module for keystone connectors from the Blank Module The ESRack system includes the following components: Mounting Brackets - used to install the unit…
Case for FNIRSI LCR-P1
I made this to my wife could use her ESR charging puck more like other stand style chargers. it needs to be printed face down for best results. I used 0.16mm layers in the photos. The back is open to help the puck vent heat.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped up this bracket to hold the power supplies for my 5060s / N07Ds. The intent was for this…
iPhone Standby Dock | iPhone 17 & 16 Pro Max (ESR Case Compatible) Elevate your desk setup with this Standby Mode dock, specifically tailored for the iPhone 17 Pro Max and 16 Pro Max using an ESR Case . This remix is inspired by Scott…
Added 9V battery compartment and some descriptive text on the front panel
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Print at 0.15 with 100% infill
Gedruckt habe ich den Adapter in PETG. Er verbindet das ESR Halolock Cryoboost Ladegerät mit meinem BRODIT MoveClip . Zur Verstärkung habe ich eine M4 Zylinderschraube eingesetzt. In Version 1 kommt eine Sechskantmutter zum Einsatz. In…
I took off 2mm from the original mounting bracket by EvilProphet. One of my racks was off by 4mm and wouldn't fit. With the bracket having 2mm less width it provided enough room for me to slide in my rack. Hopefully this helps someone else.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I've printed a bunch of stuff part of the ESRack system for my home rack but I didn't like the HP Elitedesk module by @EvilProphet , so I resized and combined the one created by @Spekkie3D and added ESRack side brackets. This retains all…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Make your own custom ESRack device holder by just plugging in your device's dimensions! Go to this OnShape project Copy it to your account Change the variables at the top left to the dimensions you need (DeviceWidth, DeviceHeight,…
A remix of this design https://www.thingiverse.com/thing:5765772 by https://www.thingiverse.com/oneirosdream/designs . This design allows quick storage and set up of the corporations in Skymines. The original was very well-designed, but I…
An alternative iPhone charging stand part for regular/pro iPhone 12,13,14 phones that is compatible with the 3rd party ESR wireless charger See the original model for the bases and the apple watch parts here
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti UniFi Switch Ultra from the Blank Module The module will also work for USW-Ultra-60W and USW-Ultra-210W The ESRack system includes…
Created for my version of the MG328 tester. Check your size from the pictures. The PCB thickness is 1-1.1mm. Layer size: 0.2 Line Width: 0.4 Infill: 20% It requires four M2x8-12 screws and two pieces of transparent filament to be inserted…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Wall mount is mounted using double-sided tape
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Does not work for the 15/15 Pro, but works for the max and should work for the plus Updated 9/28/2023 Ultra slim holder versions were added for ABS tolerances ( Untested ) Updated 9/27/2023 There are new versions of the models with…
This is a simple case for LCR-T3 ESR component tester. Print Settings Printer: Prusa i3 Hephestos Rafts: No Supports: No Resolution: 0.20 Infill: 20 Category: Electronics
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped this bracket for my 5060s / N07Ds. The ESRack system includes the following components:…
Introduction I've been printing a bunch of ESRack things for my work and home racks and I've always wanted to rackmount these annoying cable boxes. Unfortunately they have a case that's almost exactly 1U high, so the standard ESRack…
A customised remix of a really practical design for a MagSafe Joy-Con grip that allows for rotating into portrait mode as well as landscape. The original was designed for using magnets you can buy to fit into the slot to make the grip…
Tight fit for the Ser5 Pro, so the walls aren't as thick, due to the height of the device. I had to remove the rubber feet on the bottom of the device. I used supports on my print, though you may not have to depending on your printer's…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi CloudKey Gen2 Plus from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following…
I really liked the original ESRack system design created by @EvilProphet . Although it has mounts for many devices it lacked mounts for Raspberry Pi. Therefore I present one designed by me for this specific passive cooler that could be…
A place for my Unifi PoE injectors using the excellent ESRack system by @EvilProphet . (height: 1 Rack unit) There already are other Unifi holders for ESRack - but since I have a mix of models (and each of the dozen or so PoE injectors by…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Philips Hue Bridge from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
I have an ESR Halolock charger for my iPhone which i had mounted to the air vents in my Vauxhall Corsa, unfortunately the clip snapped unexpectedly. I created a more sturdy vent mount for this charger but this should be compatible with…
A simple housing for the component tester. the battery has a fixed place in the housing.
@EvilProphet made a really nice system called ESRack. Expanding on it, as it rocks The ESRack system includes the following components: Mounting Brackets - used to install the unit in the rack, available in 3 sizes: Short Medium Long…
My ESR MagSafe charger didn't snap in to the hole so this one is tweaked slighted to allow it to be inserted snugly.
A simple fan adapter so you could use a 40mm fan to replace the original 60mm fan inside a phat PS2 or a PSX DESR DVR. You still need to splice the wires to your new fan. Just do a color match and it should work fine. I used a 3-pin…
ESRack 1U - Module - 2x Ubiquiti UniFi PoE AF
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link Switch TL-SG108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link TL-SG1008P from the ESRack Customizable Device Mount The ESRack system includes the following components: Mounting Brackets - used…
Part Description ESRack Module for the Fritzbox 6690 Cable. Uses 2U Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium] -…
Loc-Line Connection for ESR HaloLock MagSafe. Print vertically (ball-joint to sky) without supports.
The Sukkah Esrog Box is used to house an Esrog , one of the Jewish Four Species that is used on the Holiday of Sukkos . The model houses a 7.5in x 4.5in x 4in foam protector that protects the Esrog.
Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…
Designed with ESR HaloLock MagSafe in mind as there chargers are Great and more budget friendly than the Apple Original Here's the charger this stand works with https://www.esrgear.com/products/halolock-mini-wireless-charger/ Let me know…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Netgear Switch GS308EP from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
you will need to add a pause on layer 45 (assuming .2 layer height) to place 5 pennies in each hole, (40 cents total) the holes are sized to fit 5 max with a .2mm layer above for cushion to ensure the nozzle doesnt grab on the edge of any…
This tool simplifies the handling of the compressed air adapter pieces
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, avilable in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
This remix adds a lot of strength, at the cost of quite a bit of filament. Also added a lot of strength to the front plate. Really stops any flex in the part when weight is added.
ESRack style flexible rackmount for the Anker Prime USB charging stations , which is perfect for powering multiple USB devices within the rack ( rack mount Raspberry Pi cluster ). Works with 19" and 10" ESRack rackmount ears . Added a…
Added ribs to the backside of the blank for greater stiffness
This is a stand I designed to hold the "ESR HaloLock Kickstand" Magsafe wireless charger. I included a hollow cavity inside, which I loaded up with steel BB's to add some weight to it, so that it wouldn't lift up with my phone (the magnet…
Fits ESRack mounts and other accessories used Elegoo PLA
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
PSX DVR's that i have encountered has a notorious fault of broken hinge on the front cover. This is my design for repairing front cover hinges. Print to of this part, one normal and one mirrored. Shave the remaining plastic hinge on the…
I really like the ESRack system by @EvilProphet , but it lacked JetKVM module, so I created one similar to JetKVM mount by @JaredC01 Print on front face without supports. To secure the device, you'll need 2x M2x16 screws. This is of one…
Replacement Feet for the Side rails of the Sony PSX DESR. Copied from an existing DESR-5500.
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
I made this case for a LCR-T3 ESR Meter (a cheap tester for basic electronic components like transistors). Category: Electronics
Rackmount for the 4-port ezcoo KVM 4x1 switches that are recommended integration with PiKVM for controlling 4 machines. Supported devices include: ezcoo EZ-SW41HA-KVMU3P (ideal for PiKVM) ezcoo EZ-SW41HA-KVMU3L
9V batteries are one of those things that never seem to be lying around the house, right? But recently, I bought a bunch of MT3608 DC-DC Boost Converter 2A Adjustable Step Up Modules from Amazon, and suddenly, I had the perfect excuse to…
I really liked the original ESRack system design created by @EvilProphet . I created a Mounting Bracket medium for a single keystone connector. This way you can use a Module to hold your modem our router with connections on the back and…
First model I have ever made but it worked for me. Tight squeeze for the magsafe pad and the cable doesn't properly fit under original base but it works as a alternative. Meant to be used with…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi Switch Flex 10 GbE USW-Flex-XG from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Switched to a different wireless charger ESR HaloLock, got 2 for less than the price of 1 Mophie. So had to redo the holder Mine's a nice fit at 59.4mm diameter
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
Description ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for the MikroTik CR305-1G-4S+IN from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
Rack mount Gateway Fiber/Cloud Gateway Fiber (UXG-Fiber/UCG-Fiber) for 19 inches rack. Due to the device is too wide the mounts are not detachable. It is exactly 9.5 inches wide so it is possible to use with another device in the same…
This is an adapter platform for mounting ESR's Magnetic MagSafe Car Phone mounts to 11th Gen Honda Civics + 6th Gen CR-V's. These new generation Honda interiors don't have a decent mounting point for where I wanted my personal and work…
Fits ESRack mounts and other accessories used Elegoo PLA
I really liked the original ESRack system design created by @EvilProphet . I created a module for Philips Hue Bridge from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Painting eyeballs and eyebrows didn't go so well, so I cut them out of the face, so they can be printed and glued on. Category: Sculptures
I made some replacement rings for the Enkei Aeronautics EK84/HeroesRacing iSpeed. They're not 100% accurate to the original ones, for example the centercaps should have some writing on them but it's so tiny and thus hard to recreate with…
A Banana Pi R4 module for 10" mini server racks using the ESRack system remixed to support mini racks. The peripheral cutouts and mounting chassis, which this project also remixes, were developed by @kju in this great print:…
There has been a big response my makers designing and 3D printing various tools to help everyone in these trying times. One such endeavor has been the multitude of devices to help relieve the stress that mask straps put on the ears of…
I bought these ESR magsafe chargers from Amazon in a 2 pack for less than $30 AUD. I couldn't find an existing model that had both a tight fritction fit, was angled and hid the large cable strain relief on the visible side so I created…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
This is kinda ancient, but I bet many of these are still being used. These were cheap and accessible testers for both SMD and THT electronic components and they were commonly sold without any case, just a bare PCB. A few years ago I made…
A place for my Fritz!Box using the excellent ESRack system by @EvilProphet . It's a huge print, it barely fits on the bed of my Sovol SV08… but the width of the Fritz!Box is larger than a 50% module, so I went this route. If you try using…
BMW IX phone mount. Fits ESR mini qi2 charger. Hole is 58.9mm and 7.5mm deep. Uploded step file so should be easy to mod for other chargers.
This support is to avoid the NESRGB PCB from eTim (Tim Worthington) floating when you install it in a Front Loader NES. No screw needed, just put it on the side of the board. It's designed to avoid the components. Category: Electronics
I love CI and emblems. Made this from a scan via CorelDraw! and SVG export. Printed it one color on top of the other color. Can also be used for printing two colors in one layerpack, but you need to use files: Tesro1mmScript Tesro2mmPlate…
This is a remix of this model: https://www.printables.com/de/model/602703-magsafe-stand It‘s not compatible with MagSafe but it is compatible with a cheaper version I found on Amazon. ESR Halo Lock
ESRack Module for Raspberry Pi. Tested with Raspberry Pi 4 but should be compatible with 5 as well as dimensions are the same. This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for NiPoGi AM02 Pro from the Blank Module and share it here You need to remove the 4 gum footer and readd screw You can put the NiPoGi AM02…
