Locking Anchor for 3/8" x 3/4" Miter Slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Locking anchor for a standard 3/8" x 3/4" miter slot. Does not have T-slot found on some miter slots.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 50
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made to fit a 3/8" x ¾" miter slot on a Kreg router table to hold jigs and such.
Printed in PETG, 100% infill, a few perimeters, 0.2mm layer height.
Uses a 5/16-18 counter sunk screw for taper clamping mechanism. Pictures show a Rocker knob used to test it on the router table. Any knob would do though. Takes a few turns to get the screw to start to grip, but once it starts to tighten, it gets tight! With this tight in the Kreg router table's non-t-slot miter slot, I can move my router table cart around, and it doesn't slip. Feels very solid.
(Since this is for dangerous power tool, use at your own risk.)