1 / 3
Roller bearing with M3 bolts as rollers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D printable roller bearing. The model is designed so that M3 bolts can be used as rollers.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 14
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Share Alike
This is a 3D printable roller bearing. The model is designed so that M3 bolts (with the heads cut off) can be used as rollers. The gap for the rollers is 12mm long, 10-11mm long rollers works best. I would recommend cutting 14mm bolts down to 11mm and removing the head in the process. The hole is designed to fit an 8mm shaft.