1 / 1
Prusa Accelerometer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The Input Shaper functionality on your Original Prusa MK4/S, MK3.9/S or MK3.5/S can be calibrated using an optional accelerometer.
You can find more information about the accelerometer here.
Print instructions
Download the latest PrusaSlicer and use the following settings**:
- Print settings: 0.20mm STRUCTURAL
- Filament: PETG (tested on Prusament)
- 15% Grid infill
**Note that print settings are recommended, but you can experiment with your own.
The default recommendation for the material is black PETG unless stated otherwise in the part's notes.