(Lobotomy Corperation/Library of Ruina) Queen of Hatred's Staff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Queen of Hatred's Staff from Lobotomy Corporation and Library of Ruina
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 0
- Views
- 832
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Hello everyone, at the request of some members on a discord server I am a part of, I have made the Queen of Hatred's Staff from Lobotomy Corporation and Library of Ruina. The reason I say both is that she is in both games but also I blended the two versions of the staff she is seen with. I realized some time after my Ahab Harpoon that something that massive is unwieldy to a good amount of people so for this design, I have added a way for people to adjust the height of the staff! I have also made it possible to fit a wooden pole in the middle of the staff for extra strength.
FOR PERSONAL NONCOMMERCIAL USE
https://cults3d.com/@MrHShroud
Be sure to leave a comment on what I should make next from Limbus Company! Follow my Twitter for updates and donate to my Kofi if you enjoy my work!
Suggested Print Settings (but feel free to print at whatever settings you want):
Resolution: .2
.2 infill
60 mm/s
Parts needed:
1 Whole star (or 1 of both Star Top and Star Bottom)
1 Staff Top
As many Staff Middle's as you want (Hole or Not depending on if you wish to add a wooden core for more strength)
1 bottom star adaptor
1 Whole Staff Bottom (or 1 of both Staff Bottom 1 and Staff Bottom 2) (it is recommended to do the splits to avoid difficulties printing)
Minimum 7, 20mm X 20mm Pegs (included STL if you do not want to get wooden ones)
Glue of choice (I recommend super glue)
2 Wings (Mirror in your slicer to get the other one)
*staff bottom 1 is the top and 2 is the bottom of the split
For assembly:
If you did the splits, insert the pegs into the holes made and line them up with each other. Add glue after you make sure they are lined up correctly to lock them together. The staff all fit together after that, all you have to do is just glue them together.
***If you made the staff sections with the hole made for the wooden dowel, insert that before you glue the entire staff together. The top handle's depth is 75mm, and the bottom heart's depth is 59mm, add these to whatever length you want for the wooden dowel should you add it. Remember each section of the handle is 100 mm