1 / 2
Corkboard Magnet Holder (<1g)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some Things are too nice to have a pin poking through them! Holds two 10x2mm Magnets using a snapoff pressfit
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Sometimes stuff is just too pretty to have a hole poked through. This is an addition to the myriad of similar models out there. Designed for 10×2mm magnets, it uses small breakaway tabs at the top edge, that jam the magnet in place.
Print at 0.2 mm layers, and should work with both PETG and PLA. Comes in a short and a long variant and uses less than 1g of Filament!