1 / 4
Magnetic Latch for Ikea's Besta doors — image 1
1 / 4

Magnetic Latch for Ikea's Besta doors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This latch utilizes existing screw holes in the door and structure of Ikea Besta, and 5mm thick ring magnets.

Rating
0 / 5
Likes
8
Downloads
32
Makes
0
Views
384
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Share Alike

I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. 
 

Since my closet dry box is experimental, I did not want to commit on an off-the-shelf latch, which would require screwing it close to the door. Plus the door is metallic, so we can't screw the plate wherever we want on the door.

I made this adapter latch which uses the existing screw holes in Ikea Besta for the door hinge. It's strong enough to keep the door snug and easy to open too.

  • It fits in the existing screw holes so you don't damage your furniture.
  • Designed for Ikea's BESTA series, but I believe that other series such as PAX also use the same hole pattern.
  • It is slim enough to not cause issues when taking things out.
  • In my observations, I notice that the force is sufficient to pull the door when it's nearby, and stronger/bigger ring magnets can be used for more oomph. 
  • Use matching ring magnets on the door and the adapter and screw them. Specific distance between the magnets can be adjusted with washers.
  • I used 3mm screws, making sure to use countersunk ones for the magnet. Ensure the facing magnets are of opposite polarity. 
  • Print with 3 or more perimeters, no need for support. 10% infill of your choice should be enough.

 

I provide the step file in case you want to modify it. Hope you find it useful!

Tags