1 / 4
Defy DCH300 Fume Extractor Grate Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips for Defy DCH 300 fume extractor grates/grids to replace the 0.5mm thick aluminium tabs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
The Defy DCH 300 series fume hoods/extractor come with little aluminium tabs that are exactly 0.5mm thick, as a result they break off when you look at them funny.
I designed little tabs that can be press-fit and printed in place for the hood.
Designed to be printed in PLA or PETG (I used hyper PLA without issue)
- inner/outer/inner wall order (for cleaner clips)
- 0.16mm layer height (all layers)
- 3 perimitter walls
- 50% - 100% infill, gives it extra strength
Press fit the clip side into the grate/grids for a nice press-fit that should hold.
Push the grate into the fume hood as you usually would.
Smile at the beauty.