1 / 2
Desktop stand for Magnehelic and Manometer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A desktop stand for both a Dwyer Instruments Magnehelic differential pressure gauge and a 100mm Manometer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A desktop stand for both a Dwyer Instruments Magnehelic differential pressure gauge and a 100mm Manometer side by side.
- Print this at 0.2mm layer height
- I heavily recommend using PETG or some other robust material and not PLA
- 3 Walls and 10% Gyroid Infill worked fine for me
- Make absolutely sure the print orientation is correct, especially the middle part needs to be on the correct side so the screw bore droplets are pointing upwards.
- The G¼" nut is optional, should you wish to use it to fixate the Manometer to the back of the plate with it. I suggest printing that one in a finer resolution like 0.1mm
You'll need the following hardware as well:
Assembly:
- 4x M6 x 20 Cylindrical head screws (DIN 912)
- 4x M6 Nuts (DIN 934)
Desk mounting (should you wish to do so):
- 4x M6 Cylindrical head screws (DIN 912) in whatever length needed for your desk
- 4x M6 Nuts (DIN 934)
- 4x M6 Washers (DIN 9021)
Magnehelic mounting and usage:
- 3x #6-32 x ½" countersunk screws
- 2x 1/8" NPT plug
- 2x 1/8" NPT hose fitting
- 1x PTFE tape
Manometer mounting and usage:
- 1x G1/4" connector of your choice, i used a NW 7,2 quick coupling
- 1x PTFE tape