1 / 2
Brennenstuhl Bremounta 90° Power Strip Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches Brennenstuhl Bremounta power strips to flat surfaces at a 90° angle.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 1
- Views
- 237
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Every time I vacuumed my bedroom, I was annoyed by the power strips lying on the floor, so I made this holder to attach them to the bottom of the nightstands.
The bracket can be screwed onto any flat surface and mounts the power strip at a 90° angle. The excess cable can be rolled up on the brackets and secured with zip ties. Compatible with Brennenstuhl Bremounta power strips.
Attention: If you slice the file yourself, don't forget to add a pause at 11.80mm, as the nuts cannot be inserted later.
Materials you'll need
- 4 Pcs. 3,5x25mm Countersunk Wood Screw
- 4 Pcs. M4x40mm Bolts
- 4 Pcs. M4 Nut
- Zip Ties